Nhà Sản phẩmXe hơi chính Lập trình viên

BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool

BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool

    • BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool
    • BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool
    • BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool
    • BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool
  • BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool

    Thông tin chi tiết sản phẩm:

    Place of Origin: China
    Hàng hiệu: Hippotech

    Thanh toán:

    Minimum Order Quantity: 1pc
    Packaging Details: Standard export package
    Delivery Time: Within 1-2 working day upon receipt payment
    Payment Terms: T/T, MoneyGram, Paypal
    Supply Ability: 1000pcs/week
    Liên hệ với bây giờ
    Chi tiết sản phẩm

     

    BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool

     

    BMW Multi  Tool latest software V4.9

    Powerful than AK300!!!



    BMW Multi Tool includes forth parts, hardware device, dongle, programmer, software. Before running software you must connect dongle and hardware device to computer.

     

    V4.1 update instructions:


    1.Using the vehicle ignition switch is directly generated dealers key
    2.Support the latest version of the the ISTA P45/ISTA P46 downgrade access to anti-theft data area, when lost them all to generate the distributor key.
    3.Bug repair
    4.Only in 4.0 on the basis of some bug fixes, not to add new features


    New software update:V3.0, here is update tips:


    1.The software v3.0 must be run above firmware V1.0.4.
    2.You can go to Help->Device Update->Device Update to update your device to the newest version.
    3.Once you update your firmware when use V2.5 software. It does not need update the firmware again.
    4.add italian and spanish language.
    5.Normal bug fix.

     


    Description:


    1. OBD II CONNECTOR: Connects the tool to the vehicle's Data Link connector (DLC).
    2. Dongle: USB dongle.
    3. USB CONNECTOR: Connects the tool to the PC/Laptop through USB Cable.
    4. Programmer: Program keys.
    5. Programmer Female Pin: Connects programmer to device.
    6. Programmer Male Pin: Connects programmer to device.


    Specifications:


    1. Operating Temperature: -20 to 70 °C ( -4 to 158 °F )
    2. Storage Temperature: -40 to 85 °C ( -40 to 185 °F )
    3. Diagnostic Interface: 16 PIN
    4. USB Interface: USB 2.0
    5. Power: DC 5 V - 12 V
    6. Consumption: 1 W
    7. Dimensions: Length 95 mm, Width 49 mm, Height 28 mm


    Function:

    BMW MULTI TOOL supported function including:

    1. Car access sytem dentification
    2. Read/Write CAS EEPROM(OBDII)
    3. Read/Write KM stored in CAS system(OBDII)
    4. Read/Write synchronization codes stored in CAS system(OBDII)
    5. Synchronize DME and CAS(OBDII)
    6. Synchronize CAS and ELV(OBDII)
    7. Prepare dealer key for CAS1/CAS2/CAS3/CAS+(support latest CAS3 verison)(OBDII)
    8. Read/Restore CAS KEY information(OBDII)
    9. Disable/Enable key with working key(OBDII)
    10. Clear DTC and Shadow (OBDII)
    11. Prepare dealer key with CAS eeprom dump
    12. Unlock dealer key prepared with our software with CAS eeprom dump or KEY information
    13. Change KM in CAS and instrument dashboard with file dump
    14. Have key programmer, you can programm dealer key directly.

    Pay attention to the function: Help->Device update. You can get the latest software version and firmware verion when you can access to internet.
    1. Menu:
    - Tool: you can choose language here, support "English" and "Chinese Simplified" Restart software to apply your settings.
    - File Make Key: you can prepare dealer key with EWS and CAS EEPROM dump.
    - Help: Device update. You can get your device and dongle id version and update it.

    2. Protocal type:
    Now BMT support there type of protocol: KWP-CAN BUS 100Kbps, KWP-CAN BUS 500Kbps, KWP-2000. "Auto Detect " function can help you to choose the right protocol. After choose protocol okay, then press "Connect". If connected success. All CAS info will display in CAS Identification. Include CAS number, VIN, production date, etc.

    3. EEPROM Function:
    Read EEPROM, Write EEPROM, Save File, Load File…
    1). You should backup the CAS EEPROM before prepare dealer key. After succeed read EEPROM, please save it as back file. This step is very important.
    2). Now can't read the whole EEPROM for cas3 system. But the main section is contained. It should be saved. When you read CAS EEPROM, it will give tips (Press ok to continue).

    4. Odometer:
    Support read and change KM stored in CAS system.
    Don't support to change KM in instrument. If you want to change the KM display in instrument. You should change KM in CAS system first. Then modify the KM in instrument manually.

    5. Synchronization Codes:
    1). CAS3 code-DME, CAS3code-EGS: Read and write DME and EGS code stored in CAS3 system.
    2). Synchronize DME and CAS— this function will be useful while prepare dealer key or any other operation which cause can't start the engine.
    3). Synchronize CAS and ELV — this function can help clear wheel errors

    6. Key Learn
    Function introduction:
    1). Get Key Info: With this function you can get the key cutting, remote frequency, and key data.
    2). Save Key Info: Save the read key info.
    3). Load Key Info: Load the saved key info. To see the key data and prepare for write key info.
    4). Write Key Info: Write the loaded key info into CAS system.
    5). Make Dealer Key: You can prepare dealer key after you get key info successfully. Also you should choose the key position.
    6). Add key: Add the new dealer key into CAS system. Some CAS system needs this step to start the engine.
    7). Enable Key: Insert the current key into ignition switch, press "Enable Key". The key after current key will be enabled.
    8). Disable Key: Insert the current key into ignition switch, press "Disable key". The key after current key will be disabled.
    9). Clear DTC: Before prepare dealer key and after it you can use this function to clear DTC.
    10). Clear Shadow: Before prepare dealer key and after it you can use this function to clear Shadow.

    7. File Make Key
    1). Choose CAS or EWS type.
    2). Load the choose EEPROM file you will get the make dealer key window.
    3). Choose key position and press "Make Dealer Key" button. Flow the given tips to prepare dealer key. After succeed you can save the new EEPROM dump file.
    - For EWS1, EWS2, EWS3, EWS4, CAS1, CAS2, CAS3 type the prepared dealer key can start the engine directly.
    - For some CA3+ type you need to write back the new dump file into car.
    4). CAS3 encrypt data, only OBDII prepare make key is support for CAS3 encrypt data.


    Warning: Make sure connect dongle to compute before run the software.
    BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing ToolBMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing ToolBMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool

    Chi tiết liên lạc
    Hippo Technology Co.,LTD

    Người liên hệ: cathy

    Gửi yêu cầu thông tin của bạn trực tiếp cho chúng tôi (0 / 3000)

    Sản phẩm tốt nhất
    Sản phẩm khác
    tự động công cụ chẩn đoán

    Công cụ chẩn đoán động cơ đa ngôn ngữ với SSD Plus Phần mềm máy tính xách tay Panasonic CF19 I5 4GB

    V2019.9 MB SD C4 PLUS Star Công cụ chẩn đoán tự động với DTS Monaco / Vediamo miễn phí

    Công cụ chẩn đoán tự động bền bỉ BMW ICOM TIẾP THEO BMW ICOM A2 A + B + C Plus Máy tính xách tay Lenovo X220 I5 4GB

    Công cụ lập trình quét chẩn đoán tự động Doip USB Dongle cho Mercedes Till 2019

    Xe hơi chính Lập trình viên

    Máy cắt chìa khóa tự động 200W Xhorse CONDOR XC-MINI Plus CONDOR XC-MINI II được bảo hành 3 năm

    Máy cắt chìa khóa ô tô CG Godzilla Hỗ trợ thiết bị di động / PC có pin tích hợp

    Máy lập trình chìa khóa xe hơi CNC Máy tính bảng Android Ford Tibbe Jaws FO21 Kẹp 2019 SEC-E9

    AK500Pro AK500 PRO Super Car Lập trình viên chìa khóa mà không cần loại bỏ ESU ECU cho Mercedes Benz

    Khởi động X431 Scanner

    Khởi chạy Máy quét chẩn đoán xe Creader CRP Touch Pro 5.0 "Toàn màn hình cảm ứng Android

    Công cụ dịch vụ chẩn đoán Android Pad Khởi chạy Máy quét X431 Cập nhật miễn phí trực tuyến trong 2 năm

    Công cụ chẩn đoán tự động mã CRP 429C OBD2 LAUNCH X431 CRP429C dành cho động cơ / ABS / SRS / AT

    Công cụ chẩn đoán xe tải hạng nặng Bluetooth Bluetooth Ra mắt ban đầu X431 V + HD3

    Yêu cầu báo giá

    E-Mail | Sơ đồ trang web

    Privacy Policy Trung Quốc tốt chất lượng tự động công cụ chẩn đoán nhà cung cấp. Copyright © 2012 - 2019 auto-diagnosticstools.com. All Rights Reserved.